GB 2099.5-2008 English PDF

Delivery: 2 working-hours manually (Sales@ChineseStandard.net)
Need delivered in 3-second? USA-Site: GB 2099.5-2008
Get Quotation: Click GB 2099.5-2008 (Self-service in 1-minute)
Historical versions (Master-website): GB 2099.5-2008
Preview True-PDF (Reload/Scroll-down if blank)

GB 2099.5-2008: [GB/T 2099.5-2008] Plugs and socket-outlets for household and similar purposes -- Part 2: Particular requirements for switched socket-outlets with interlock for fixed installations
GB 2099.5-2008
Plugs and socket-outlets for household and similar purposes.Part 2. Particular requirements for switched socket-outlets with interlock for fixed installations
ICS 29.120.30
K30
National Standards of People's Republic of China
GB 2099.5-2008/IEC 60884-2-6.1997
Plugs and sockets for household and similar purposes - Part 2.
Fixed with interlock switch socket special requirements
(IEC 60884-2-6.1997, IDT)
Posted 2008-12-30
2010-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface ???
IEC Foreword ???
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 2 General requirements
5 Test 2 Overview
Rating 2 6
7 Category 2
8 mark 3
9 3 Dimensional inspection
10 Protection against electric shock 3
11 grounding 4
12 Terminals and terminations 4
Fixed receptacle structure 13 4
Structure 14 plugs and mobile sockets 4
15 Interlock socket 5
16 anti-aging, and moisture protection provided by the housing 5
17 Insulation resistance and electric strength 6
18 ground contacts 6 working
19 rise 6
20 Breaking capacity 6
21 Normal operation 6
The force required to pull the plug 22 6
23 soft and cable connection 7
24 mechanical strength 7
25 Heat 7
26 Screws, current-carrying parts and connections 7
27 distance creepage distances and clearances by the sealant 7
Abnormal heat-resistant, flame-resistant and electrically insulating material to tracking 28 7
29 7 rust
Additional tests with a pin 30 of the insulating jacket 7
GB 2099.5-2008/IEC 60884-2-6.1997
Foreword
All technical content in this section are mandatory.
GB 2099 "plug and socket for household and similar purposes" is divided into the following sections.
Part 1. General requirements
Part 2. Particular requirements
--- Particular requirements for fused plugs
--- Particular requirements for appliance socket
Particular requirements --- converters
Particular requirements --- Fixed without interlock switch socket
--- Fixed Particular requirements for interlocking with a switch socket
--- Safety extra-low voltage plug and socket special requirements
This section is Part 2 GB 2099. Fixed special requirements with interlock switch socket.
This section identical with IEC 60884-2-6.1997 "plugs and sockets for household and similar purposes - Part 2. Fixed with interlock switch
Special requirements "socket.
This section should be GB 2099.1 "plugs and sockets for household and similar purposes - Part 1. General requirements" in conjunction.
This part is proposed by the China Electrical Equipment Industrial Association.
This part of the National Electric annex Standardization Technical Committee (SAC/TC67) centralized.
This section drafted by. China Electric Apparatus Research Institute, Zhejiang Chint Building Appliance Co., Ltd., Hangzhou Hongyan Electric Co., Ltd., Guangdong
Matsumoto Electrical Appliance Co., Ltd., Clipsal Industries (Huizhou) Co., Ltd., Zhejiang Yuehua Telecommunication Co., Ltd., based Electric (Shenzhen) Co., Ltd.
The main drafters of this section. Meng Zhiqiang, Shi Jihua, single toward blue, Zhang Wenjie, He Zhiguo, Tangyan Lan, holy dynasty, Angui Long, Zheng Liqing.
GB 2099.5-2008/IEC 60884-2-6.1997
IEC Foreword
1) IEC (International Electrotechnical Commission) is composed of national Electrotechnical Commission (IEC National Committees) worldwide standardization groups
Organizations. The object of IEC is to promote international cooperation in the field of standardization and related electrical and electronic problems. For this purpose, IEC addition to carrying out
Among other activities, publishes international standards. These standards work is entrusted to technical committees to complete. Each member of the IEC
National Committee, as long as the standard to be developed are interested may participate in this preparatory work. Liaising with the IEC 's international official group
Organization is also involved in the development of standards. IEC and the World Organization for Standardization (ISO ) in accordance with the conditions specified in the agreement, close cooperation.
2) since each technical committee has representatives from the National Commission on the relevant issues of interest, so the IEC on technical
The formal decisions or agreements in question are the maximum expression of the international consensus on the relevant issues.
3) documents generated in the form of recommendations for international use, and standards, technical specifications, technical reports or guidelines published in the form,
And National Committees in that sense of acceptance.
4) In order to promote international unification, IEC National Committees in charge of the IEC international standards transparently converted to the maximum extent possible
National or regional standards. Between the IEC Standard and the corresponding national or regional standard if there is any difference should be made clear after the standard conversion
Explained.
5) IEC did not develop any signs of approval procedures. When a device is declared if it complies with one of its standards of IEC , IEC this
Irresponsible.
6) All users should ensure that they should have the latest version.
7) whether and when and where the direct or indirect, or use or publication or other means of the IEC and the IEC publication
Publication costs incurred (including legal fees) and expenses, IEC or its directors, employees, servants or agents (including individual experts
And members of the Technical Committee) and the IEC National Committee has no obligation to any personal loss, property damage or other natural causes on
Responsible for any loss caused.
8) Note that this publication cited normative references. In order to accurately use of this publication, a reference to the relevant publications are essential.
9) Note IEC publication may be involved in some of the patents subject ingredient. IEC has no obligation to determine whether any or all of these
patent.
International Standard IEC 60884-2-6 by IEC TC23. electrical accessories Technical Committee SC23B plug socket and switch the Technical Committee
Members will be established.
And IEC 60884-1 3rd Edition for use.
This standard is based on the following documents.
Draft International Standard document Report on voting
23B/521/FDIS 23B/530/RVD
Details of the standard vote, voting reports listed in the table above.
This standard is based on ISO /IEC Directives, Part 2 written.
This Part 2-6 of IEC 60884-1 with the intended use. This document is based on the third edition of IEC 60884-1 is established.
This Part 2-6 supplements and modify the corresponding clauses in IEC 60884-1, IEC standard to convert it costs. fixed in chain with a switch
Particular requirements for socket.
In Part 2-6 in Chapter 1, shall apply in this part of the standard continues to apply. Where in this standard marked "increase", "modification" or
By "alternative" content, Part 1 of the relevant contents shall make the appropriate changes.
Reg - Part 1 does not have, graphs or tables numbered from 101 onwards.
When the first part of the applicable provisions indicated applies only contain fixed in chain with a switch socket related requirements.
A list of all parts IEC 60884 series, under the general title. plug and socket for household and similar purposes. It can be found on the IEC website.
GB 2099.5-2008/IEC 60884-2-6.1997
Plugs and sockets for household and similar purposes - Part 2.
Fixed with interlock switch socket special requirements
1 Scope
GB 2099.1 of this chapter make the following modifications apply.
GB 2099 this section applies to household and similar purposes for indoor or outdoor use, rated voltage with or without ground contacts
50V more but not exceeding 440V, rated current not exceeding 32A AC fixed with interlock switches and sockets.
Subject to this section are interlock switches and sockets from a socket in line with GB 2099.1 and in line with GB 16915.1 and/or GB 16915.2
The switch interlock to form a complete part.
For screwless terminals equipped with a fixed attachment, the maximum rated current is limited to 16A.
This section does not include requirements for concealed mounting box.
This section includes sockets Surface-mounted mounting box test requirements necessary.
Note 1. The case for universal installation requirements given by the GB 17466.
Note 2. This section does not apply in line with GB 10963, GB 16916 and GB 16917 devices have socket interlock. This part can be used as these
Requirements and test related accessories guidelines.
This section does not apply to.
--- Interlock device outlet for industrial use;
--- ELV has a socket interlock.
Comply with the requirements of this Annex for use in usually not more than 35 ???, but occasionally reaching 40 ??? ambient temperature.
2 Normative references
GB 2099.1 of this chapter make the following modifications apply.
Add the following reference standards.
Part 1 GB 16915.1-2003 Switches for household and similar fixed electrical installations. General requirements (IEC 60669-1.
2000, MOD)
Part 2 GB 16915.2-2000 Switches for household and similar fixed electrical installations. Particular requirements - Section 1. Power
SWITCH (eqv IEC 60669-2-1.1996)
3 Terms and Definitions
GB 2099.1 of this chapter apply to make the following modifications.
Add the following terms and definitions.
3.101
Electrical or electronic or mechanical, or any combination of these three means can before mating plug and socket correctly this means
Avoid plug plug plug cover or charged, and when the plug latch sleeve or plug the plug can not be pulled or charged prior to pull the plug
Let socket insert set off.
3.102
Factory-assembled unit with an interlock device according to an outlet and the outlet control switch composed of a Siamese.
GB 2099.5-2008/IEC 60884-2-6.1997
3.103
After the plug is properly inserted to keep the plug in place and prevent mechanical device plug is inadvertently pulled out.
4 General requirements
GB 2099.1 of this chapter apply.
5 Test Overview
GB 2099.1 of this chapter make the following modifications apply.
5.4 increase in the fourth paragraph.
Test Chapter 15, it might need three additional specimens.
6 RATINGS
GB 2099.1 of this chapter apply.
Category 7
GB 2099.1 of this chapter apply to make the following modifications.
7.2 Addition.
7.2.101 interlock with switch socket is divided into.
7.2.101.1 press the START switch method of classification.
---Rotary switch;
--- Pull down switch;
--- Rocker switch;
---power switch button;
--- Touch switch;
--- Proximity switch;
--- Light control switch;
--- Voice-activated switch;
--- Other external sensor switch.
7.2.101.2 Press switch poles Category.
--- Single-pole switch;
--- Pole switch;
--- Three-pole switch;
--- Three-pole with neutral wire switch.
7.2.101.3 classification by type of interlock.
---mechanical;
--- Electric type;
--- Electronic;
--- Any combination of these three.
7.2.101.4 holding means by Category.
--- Without holding means;
--- Tape holding means.
GB 2099.5-2008/IEC 60884-2-6.1997
8 flag
GB 2099.1 of this chapter apply to make the following modifications.
8.1 before the second note add.
--- Small gap structure symbols, if applicable;
--- Micro-gap structure symbols, if applicable;
--- Semiconductor conversion device symbol, if applicable.
8.2 supra note add.
--- Small gap structure symbol
--- Micro-gap structure symbol
The semiconductor conversion device symbol ---
(Under consideration)
--- "Off" position (off) ???
--- "On" position (on) ???
After the first three increases Note 2).
Note 4. The symbol "???" should only be used for normal switch-gap structure.
Note 5. You can also use other suitable durable method to display the position of the switch contacts.
increase.
2) according to the provisions of GB 16915.1 Note 4 and increase our products according to the actual situation Note 5.
8.101 connection phase line (mains lead) terminals should be an identification mark, unless the connection method is not important in itself, is self-evident, or
On the wiring diagram indicated by outside. Such terminals shall be marked with the letter L to identify, if more than one of such terminals, respectively, the letter should be L1,
L2, L3, etc. to identify, and that these letters can be shown each with an arrow to its respective terminal.
On poles, three and four pole switch, unless the relationship between the terminal itself is self-evident, otherwise, with any one of the terminals corresponding pole
We should have such an identification mark (where applicable), to distinguish it from other poles corresponding terminals.
These marks shall not be placed on screws or other easily removable parts.
Compliance is checked by inspection.
8.102 poles, three poles and four-pole switch and switch should sign a rated voltage above 250V or exceed the rated current of 16A, clearly marked
It shows the actual position of the starting element toward a different direction or position of the switch.
The flag should be in front with a switch socket, when fitted with a roof or cover should be clearly visible. If these signs and markings on the cover, the cover should be
It is not possible to ensure that these components will result in the installation mark the wrong position.
Logo start moving direction of the element, it can be represented by the symbol.
"On" position (on) should be clearly marked.
Compliance is checked by inspection.
9 Dimensional inspection
GB 2099.1 of this chapter apply.
10 Protection against electric shock
GB 2099.1 of this chapter apply to make the following modifications.
increase.
10.101 knobs, levers, buttons, rocker panels and other insulation products should be, or you must use double or reinforced insulation to their easy touch
And metal parts and metal parts separated by the switching mechanism, or their ac...