CNCA C24-01-2024 English PDF (CNCAC24-01-2024)

Delivery: 2 working-hours manually (Sales@ChineseStandard.net)
Need delivered in 3-second? USA-Site: CNCA C24-01-2024
Get Quotation: Click CNCA C24-01-2024 (Self-service in 1-minute)
Historical versions (Master-website): CNCA C24-01-2024
Preview True-PDF (Reload/Scroll-down if blank)

CNCA C24-01-2024: China Compulsory Certification Implementation Rules - Household Gas Appliances
CNCA-C24-01:2024
CNCA / CCC
Serial No.: CNCA-C24-01:2024
China Compulsory Certification Implementation Rules -
Household Gas Appliances
ISSUED ON: APRIL 08, 2024
IMPLEMENTED ON: JULY 01, 2024
Issued by: Certification and Accreditation Administration of the People's
Republic of China
Table of Contents
0 Introduction ... 3
1 Application scope ... 3
2 Certification standards ... 3
3 Certification modes ... 4
4 Division of certification units ... 4
5 Certification entrusting ... 5
5.1 Application and acceptance of certification entrusting ... 5
5.2 Application materials ... 5
5.3 Implementation arrangement ... 5
6 Certification implementation ... 5
6.1 Product test ... 5
6.2 Initial factory inspection ... 7
6.3 Certification evaluation and decision ... 7
6.4 Time limit of the certification ... 7
7 After-certification supervision ... 8
7.1 After-certification follow-up inspection ... 8
7.2 Factory on-site sampling test or inspection... 8
7.3 Market sampling test or inspection ... 9
7.4 Frequency and time of after-certification supervision ... 9
7.5 Record of after-certification supervision ... 9
7.6 Evaluation of after-certification supervision results ... 9
8 Certificate ... 10
8.1 Maintenance of certificate ... 10
8.2 Change of products covered by the certificate ... 10
8.3 Expansion of products covered by the certificate ... 10
8.4 Certificate?€?s cancellation, suspension and withdrawal ... 11
8.5 Use of certificate ... 11
9 Certification mark ... 11
9.1 Permitted mark style ... 11
9.2 Mark method ... 11
10 Charges... 12
11 Certification responsibility ... 12
12 Certification implementation detailed-rules ... 12
Attachment ... 14
0 Introduction
This Rules is established based on the safety risk and certification risk of household gas
appliance products. It stipulates the basic principles and requirements for the implementation
of China Compulsory Certification for household gas appliance products.
This Rules can be used with other general rules issued by Certification and Accreditation
Administration (CNCA), such as ?€?China Compulsory Certification Implementation Rules -
Manufacturing Enterprise Classification Management, Certification Mode Selection and
Determination?€?, ?€?China Compulsory Certification Implementation Rules - Utilization of
Manufacturing Enterprise Testing Resource and Other Certification Results?€?, ?€?China
Compulsory Certification Implementation Rules - Factory Quality Assurance Capability
Requirements?€?, and ?€?China Compulsory Certification Implementation Rules - Factory
Inspection General Requirements?€?.
The certification body shall make principles for certification according to the general
implementation rules and this Rules and implement them accordingly.
Manufacturing enterprises shall ensure that their certified products are capable of sustaining
the compliance with the certification requirements.
1 Application scope
This Rules applies to:
(1) Domestic gas cooking appliances, domestic gas instantaneous water heaters (household
hot water gas instantaneous water heaters), and gas-fired heating and hot water combi-boilers.
(2) Commercial gas burning appliances and similar appliances that use town gas as energy,
use combustion air taken from indoors, and exhaust combustion products directly or indirectly
to the outdoors, including: steam generators, steamers, fryers, cooking stoves, large pot stoves,
flat-top stoves, water boilers, rice cookers, dishwashers, frying stoves, barbecue stoves, hot
plate stoves, ovens and similar appliances, as well as combinations of the above products.
Due to the changes in the laws, regulations or related product standards, technology, industry
policies and other causes which may change the applicable scope, the announcement released
by CNCA shall be final and conclusive.
2 Certification standards
5 Certification entrusting
5.1 Application and acceptance of certification entrusting
The certification client shall put forward the certification entrusting to the certification body.
Certification body shall process the certification entrusting; and feedback the acceptance or
rejection according to the time limit in the certification implementation detailed-rules.
When it does not comply with national laws and regulations AND relevant industry policies,
the certification body must not accept the certification entrusting.
5.2 Application materials
The certification body shall, in accordance with the laws and regulations, standards and other
requirements, specify the checklist of application materials in the implementation
detailed-rules (it shall at least include certification application form or contract, registration
certificates of the CLIENT / manufacturer / manufacturing enterprise, etc.).
CLIENT shall provide the required materials according to the requirements of application
material checklist in certification implementation detailed-rules. Certification body is
responsible for auditing, managing, preserving and keeping confidential of the relevant
materials, and shall inform the CLIENT of the auditing results.
5.3 Implementation arrangement
Certification body shall agree with the CLIENT on the relevant responsibilities and
arrangement of both parties in various aspects of certification implementation. And according
to the situation of manufacturing enterprise and classification management AND the
requirements of this Rules and certification implementation detailed-rules, DETERMINE the
specific program of certification implementation and INFORM CLIENT.
6 Certification implementation
6.1 Product test
6.1.1 Product test plan
Certification body shall formulate the product test plan, after auditing the materials. And
INFORM the CLIENT.
The product test plan shall include sample requirements and quantities for product test, test
standard items, laboratory information, etc.
If the CLIENT submits a product test report that meets the requirements when proposing the
certification entrusting, the certification body shall accept it.
6.1.2 Sample requirements of product test
In general, for the samples for product test, CLIENT shall select representative samples for
testing according to the requirements of the certification body. When necessary, certification
body may adopt on-site sampling method to obtain the samples. In the implementation
detailed-rules, the certification body shall clearly clarify the relevant requirements for
certification product sample sending / sampling.
CLIENT shall guarantee that all the samples provided are consistent with actual products. The
certification body and / or laboratory shall review the authenticity of the samples provided by
the CLIENT. If the laboratory has doubts about the authenticity of the sample, it shall explain
the situation to the certification body and take corresponding measures.
According to the regulations of relevant documents issued by CNCA, certification body shall,
in the certification implementation detailed-rules, specify the list of key components used in
the product and related requirements.
For key components within the scope of the compulsory product certificate purchased in the
territory, the manufacturing enterprise shall provide the compulsory product certificate. For
key components within the scope of non-compulsory product certificate, in the certification
implementation detailed-rules, the certification body shall specify the conditions and specific
requirements for the voluntary certification certificates or type test / product test reports that
can be accepted or recognized.
6.1.3 Items of product test
In principle, it shall include the compulsory safety items stipulated by the product certification
standards (for details, refer to the attachment).
When some test items in the standard are adjusted, it shall be implemented in accordance with
the relevant documents issued by CNCA.
6.1.4 Implementation of product test
In principle, product test shall be conducted in the laboratory designated by CNCA.
Laboratory shall conduct the product test to the samples, integrally record the whole test and
archive for retaining, so that the test process and results are traceable.
On the premise of not affecting the validity of the certification results, certification body can
formulate corresponding management procedures according to ?€?China Compulsory
Certification Implementation Rules - Utilization of Manufacturing Enterprise Testing
Resource and Other Certification Results?€?. The designated laboratory sends testing personnel
to use the testing resources of the manufacturing enterprise to conduct test or witness test
according to the standard requirements. The designated laboratory shall issue the test report.
The laboratory shall ensure the authenticity, correctness and traceability of the test results.
Certification body shall specify the specific requirements and procedure in certification
implementation detailed-rules.
7 After-certification supervision
After-certification supervision refers to the supervision carried out by the certification body
on the certified products and their manufacturing enterprises. The certification body shall, in
light of the classification management of the manufacturing enterprise and the actual situation,
specify the specific requirements for the selection of the method for after-certification
supervision in the certification implementation detailed-rules.
7.1 After-certification follow-up inspection
7.1.1 Principles for after-certification follow-up inspection
Based on manufacturing enterprise classification management, certification body shall
implement the effective follow-up inspection to the certified product and its manufacturing
enterprise; to verify that the quality assurance capability of the manufacturing enterprise
continues to meet the certification requirements; ensure that the certified products continue to
meet the standard requirements and maintain the consistency with the product test samples.
The after-certification follow-up inspection shall be carried out in the way of not informing
the inspected party in advance when the manufacturing enterprise is in normal production. For
those products that are not continuously manufactured, CLIENT shall provide the relevant
production plan to certification body, so that the after-certification follow-up inspection can
be conducted in an effective way.
7.1.2 Content of after-certification follow-up inspection
In accordance with ?€?China Compulsory Certification Implementation Rules - Factory Quality
Assurance Capability Requirements?€?, the certification body shall formulate specific content
such as the requirements for after-certification follow-up inspection, the requirements for
product consistency inspection, and the requirements for quality control testing of
manufacturing enterprises; and clarify them in the certification implementation detailed-rules.
7.2 Factory on-site sampling test or inspection
7.2.1 Principles for factory on-site sampling test or inspection
Factory on-site sampling test or inspection shall cover all certified categories.
If the after-certification supervision is implemented by means of factory on-site sampling test
or inspection, CLIENT, producer, and manufacturing enterprise shall cooperate.
7.2.2 Content of factory on-site sampling test or inspection
In the certification implementation detailed-rules, the certification body shall specify the
content and requirements of factory on-site sampling test or inspection. Manufacturing
enterprises shall send samples to be tested to designated laboratories.
The certification body can formulate corresponding management procedures according to
?€?China Compulsory Certification Implementation Rules - Utilization of Manufacturing
Enterprise Testing Resource and Other Certification Results?€?; use the testing resources of
manufacturing enterprises to carry out sample test (or witness test). The designated laboratory
shall issue the test report.
In the certification implementation detailed-rules, the certification body shall specify the
specific requirements and procedures.
7.3 Market sampling test or inspection
7.3.1 Principles for market sampling test or inspection
The market sampling test or inspection shall cover the certified products according to a
certain proportion.
If the supervision is implemented by means of market sampling test or inspection, CLIENT,
producer, and manufacturing enterprise shall cooperate and confirm the samples taken from
the market.
7.3.2 Content of market sampling test or inspection
In the certification implementation detailed-rules, the certification body shall specify the
content and requirements of market sampling test or inspection.
7.4 Frequency and time of after-certification supervision
Based on manufacturing enterprise classification management, certification body shall adopt
different frequencies of after-certification supervision to different types of manufacturing
enterprise. The supervision time shall be made in a reasonable way. The specific principles
shall be specified in the certification implementation detailed-rules.
7.5 Record of after-certification supervision
The certification body shall record and archive the whole process of after-certification
supervision, to ensure the traceability of the certification process and results.
7.6 Evaluation of after-certification supervision results
The certification body conducts a comprehensive evaluation of after-certification supervision
conclusions and related materials / information. If the evaluation is PASS, it may continue to
maintain the certificate and use of the certification mark. If the evaluation is Not-PASS,
certification body shall suspend or revoke the certificate according to the corresponding
situations; and announce it publicly.
8 Certificate
8.1 Maintenance of certificate
The validity period of the certificate of the products covered by this Rules is 5 years. Within
the valid period, the validity of the certificate is maintained by depending on the