CNCA C02-01-2014 English PDF (CNCAC02-01-2014)

Delivery: 2 working-hours manually (Sales@ChineseStandard.net)
Need delivered in 3-second? USA-Site: CNCA C02-01-2014
Get Quotation: Click CNCA C02-01-2014 (Self-service in 1-minute)
Historical versions (Master-website): CNCA C02-01-2014
Preview True-PDF (Reload/Scroll-down if blank)

CNCA C02-01-2014: China Compulsory Certification Implementation Rules - Circuit switching and protection or connection of electrical installations (electrical accessories)
CNCA-C02-01:2014
CNCA / CCC
Serial No.: CNCA-C02-01:2014
China Compulsory Certification Implementation Rules -
Circuit switching and protection or connection of electrical
installations (electrical accessories)
Issued on: July 16, 2014 Effective on: September 1, 2014
Issued by: Certification and Accreditation Administration of the People?€?s
Republic of China (CNCA)
Table of Contents
0 Introduction ... 3
1 Application scope ... 3
2 Standards for certification ... 3
3 Certification modes ... 5
4 Classification of certification units ... 6
5 Certification entrusting ... 7
5.1 Application and acceptance of certification entrusting ... 7
5.2 Application materials ... 7
5.3 Implementation arrangement ... 7
6 Certification implementation ... 8
6.1 Type test ... 8
6.2 Certification evaluation and approval ... 9
6.3 Time limit of the certification ... 9
7 After-certification supervision ... 9
7.1 After-certification follow-up inspection ... 10
7.2 Sampling test or inspection on production site ... 10
7.3 Market (and/or user) sampling test or inspection ... 11
7.4 Frequency and duration of after-certification supervision ... 11
7.5 Records of after-certification supervision ... 11
7.6 Evaluation on after-certification supervision ... 11
8 Certificate ... 11
8.1 Maintenance of the certificate ... 11
8.2 Change of contents of the certificate ... 12
8.3 Expansion of products that are covered in certificate ... 12
8.4 Certificate?€?s cancellation, suspension and withdrawal ... 13
8.5 Use of the certificate ... 13
9 Certification marks ... 13
9.1 Mark style permitted to use ... 13
9.2 Marking method ... 13
10 Charges ... 13
11 Certification responsibility ... 14
12 Certification implementation detailed-rules ... 14
0 Introduction
This Rules is established based on the safety risk and certification risk of circuit
switching and protection or connection of electrical installations (electrical
accessories). It stipulates the basic principles and requirements for the
implementation of China Compulsory Certification for circuit switching and
protection or connection of electrical installations (electrical accessories).
This Rules can be used with other general rules issued by Certification and
Accreditation Administration (CNCA), such as ?€?China Compulsory Certification
Implementation Rules - Manufacturing Enterprise Classification Management,
Certification Mode Selection and Determination?€?, ?€?China Compulsory
Certification Implementation Rules - Utilization of Manufacturing Enterprise Test
Resource and Other Certification Results?€?, ?€?China Compulsory Certification
Implementation Rules - Factory Inspection General Requirements?€?.
The certification body shall make principles for certification according to the
general implementation rules and this Rules and implement them accordingly.
Manufacturing enterprise shall ensure that their certified products are capable of
sustaining the compliance with the certification and are compatible with the
requirements of the standards.
1 Application scope
This Rules applies to circuit switching and protection or connection of electrical
installations (electrical accessories), including wire assembly, plugs and sockets
(household and similar, industrial use), switches for household and similar fixed
electrical installations, appliance couplers (household and similar, industrial
use), accessory enclosures for household and similar fixed electrical
installations, thermal links, cartridge fuses for miniature fuses.
Due to the changes in the laws, regulations or related product standards,
technology, industry policies and other causes which may change the applicable
scope, the announcement released by CNCA shall be final and conclusive.
2 Standards for certification
(1) Wire assembly
GB 15934, Electrical accessories - Cord sets and interconnection cord sets
GB/T 26219, Electrical accessories - Y-splitter cord sets and Y-splitter
interconnection cord sets
(2) Plugs and sockets for household and similar purposes
GB 2099.1, Plugs and socket-outlets for household and similar purposes -
Part 1: General requirements
GB 2099.2, Plugs and socket-outlets for household and similar purposes -
Part 2: Particular requirements for socket-outlets for appliances
GB 2099.4, Plugs and socket-outlets for household and similar purposes -
Part 2: Particular requirements for switched socket-outlets without interlock
for fixed installations
GB 2099.5, Plugs and socket-outlets for household and similar purposes -
Part 2: Particular requirements for switched socket-outlets with interlock for
fixed installations
GB 1002, Single phase plugs and socket-outlets for household and similar
purposes - Types, basic parameters and dimensions
GB 1003, Three phases plugs and socket-outlets for household and similar
purposes - Types, basic parameters and dimensions
(3) Switches for household and similar fixed electrical installations
GB 16915.1, Switches for household and similar fixed-electrical
installations - Part 1: General requirements
(4) Industrial plug sockets and couplers
GB/T 11918.1, Plugs, socket-outlets and couplers for industrial purposes -
Part 1: General requirements
GB/T 11918.2, Plugs, socket-outlets and couplers for industrial purposes -
Part 2: Dimensional compatibility and interchangeability requirements for
pin and contact-tube accessories
GB/T 11918.4, Plugs, socket-outlets and couplers for industrial purposes -
Part 4: Switched socket-outlets and connectors with or without interlock
(5) Household and similar appliance couplers
GB 17465.1, Appliances couplers for household and similar general
purposes - Part 1: General requirements
GB 17465.2, Appliance couplers for household and similar general
purposes - Part 2: Interconnection couplers for household and similar
equipment
GB 17465.3, Appliance couplers for household and similar general
purposes - Part 2: Appliance couplers with a degree of protection higher
than IPX0
GB 17465.4, Appliance couplers for household and similar general
purposes - Part 2-4: Couplers dependent on appliance weight for
engagement
(6) Thermal link
Certification body shall agree with the CLIENT on the relevant responsibilities
and arrangement of various aspects of certification implementation. And
according to the situation of manufacturing enterprise and classification
management AND the requirements of this Rules and certification
implementation detailed-rules, DETERMINE the specific program of certification
implementation and INFORM CLIENT.
6 Certification implementation
6.1 Type test
6.1.1 Type test plan
Certification body shall formulate the type test plan, after auditing the materials.
And INFORM the CLIENT.
Type test plan includes the information all samples?€? requirements and quantity,
test standard items, laboratory information etc.
6.1.2 Sample requirements of type test
The certification body shall specify the relevant requirements for
sending/sampling of certified products in the implementation rules. In general,
according to the requirements of certification body, samples of type test shall be
submitted by the CLIENT with representative samples for test. When necessary,
certification body may adopt on-site sampling / seal-samples method to obtain
the samples.
CLIENT shall guarantee that all the samples provided are consistent with actual
products. Certification body and/or laboratory shall inspect the authenticity of the
samples. If laboratory has any doubt on the authenticity of the samples, it shall
explain the situation to certification body and handle accordingly.
According to relevant regulations and documents issued by CNCA, certification
body shall specify the list of critical components and materials used in the
product and relevant requirements in the certification implementation rules.
For critical components and materials within the scope of compulsory product
certification purchased in China, the manufacturer shall provide a compulsory
product certification certificate. For critical components and materials within the
scope of non-mandatory product certification, the certification body shall specify
the conditions and specific requirements for acceptable or recognized voluntary
certification certificates or type test reports in the certification implementation
rules.
6.1.3 Test items of type test
In principle, it shall include all applicable items specified in product safety
standards.
When there are some adjustments to the test items in the standards, it shall be
executed based on the provisions and documents issued by CNCA.
6.1.4 Implementation of type test
In principle, type test shall be conducted in the laboratory designated by CNCA.
Laboratory shall conduct the type test to the samples, integrally record the whole
test and archive for retaining, so that the test process and results are traceable.
On the premise of not affecting the validity of certification results, certification
body may, according to "China Compulsory Certification Implementation Rules -
Utilization of Manufacturing Enterprise Test Resource and Other Certification
Results?€?, formulate the corresponding management procedure. The designated
laboratories delegate the testing personnel, according to the standard?€?s
requirements, to utilize the manufacturing testing resource to conduct test or
witness test; and the designated laboratories issue the test reports. The
designated shall ensure the authenticity, accuracy, and traceability of the test
conclusion. Certification body shall clearly define the specific requirements and
procedure in certification implementation detailed-rules.
6.1.5 Type test report
Certification body shall specify a unified form of the type test report.
After the type test is completed, the laboratory shall, in time, provide the type test
reports to certification body and CLIENT. The test report shall contain a description
of all products and certification-related information in the application unit. CLIENT
shall ensure that it is able to provide the complete and valid type test report to
certification body and laws enforcement authorities during the after-certification
supervision.
6.2 Certification evaluation and approval
Certification body shall make a comprehensive evaluation to the type test,
factory inspection results and relevant information / materials. If the evaluation is
PASS, the certificate will be granted according to certification unit. If not, the
certification body will not approve the certification entrustment, and the
certification will be terminated.
6.3 Time limit of the certification
Certification body shall make specific provisions on each step of the certification,
and determine all relevant work to be done within the time limit. CLIENT shall
cooperate with the certification body actively. In general, certificate will be
granted to CLIENT within 90 days, since the certification entrusting is accepted.
7 After-certification supervision
After-certification supervision refers to the supervision implemented to the
certified product and manufacturing enterprise. Certification body shall consider
the classification management and actual situation of the manufacturing
enterprise and clarify the specific requirements for selecting the method of after-
7.3 Market (and/or user) sampling test or inspection
7.3.1 Principles for market (and/or user) sampling test or inspection
Market (and/or user) sampling test or inspection should cover certified products
in a certain proportion.
If it adopts market (and/or user) sampling test or inspection to implement the
supervision, CLIENT, manufacturer and manufacturing enterprise shall
cooperate; and confirm the samples that are sampled from market (and/or user).
7.3.2 Contents of market and/or user sampling test or inspection
Certification body shall formulate the contents and requirements of market
and/or user sampling test or inspection in the certification implementation
detailed-rules.
7.4 Frequency and duration of after-certification supervision
Based on manufacturing enterprise classification management, certification
body shall adopt different frequency of after-certification supervision to different
types of manufacturing enterprises. The supervision time shall be made in a
reasonable way. Detailed requirements shall be specified in the certification
implementation detailed-rules.
7.5 Records of after-certification supervision
Certification body shall appropriately record and archive the process of after-
certification supervision, so that the process and results are traceable.
7.6 Evaluation on after-certification supervision
Certification body shall comprehensively evaluate the conclusion of follow-up
inspection; conclusion of sampling test; and relevant materials / information. If
the evaluation is PASS, it may continue to maintain the certificate and use of
certification mark. If the evaluation is Not-PASS, certification body shall suspend
or revoke the certificate according to the corresponding situations; and
announce it publicly.
8 Certificate
8.1 Maintenance of the certificate
This Rules covers the 5 year valid period of product certificate. Within the valid
period, the validity of the certificate is maintained by depending on the after-
certification supervision of the certification body.
Before the certification is expired, if it needs to continue to use, CLINET shall put
forward the certification entrusting within 90 days before the expiry date. If the
newest after-certification supervision, within the certificate validity, is PASS, then
certification body shall directly renew the certificate.
8.2 Change of contents of the certificate
After the product is certified, if there is change in critical components and
materials, the design and electrical structure that involve the product safety; or
there occurs the change of other items as specified by certification body in
certification...