GB 26545-2011 English PDF

Delivery: 2 working-hours manually (Sales@ChineseStandard.net)
Need delivered in 3-second? USA-Site: GB 26545-2011
Get Quotation: Click GB 26545-2011 (Self-service in 1-minute)
Historical versions (Master-website): GB 26545-2011
Preview True-PDF (Reload/Scroll-down if blank)

GB 26545-2011: Building construction machinery and equipment -- Safety requirements of drill rigs
GB 26545-2011
GB
NATIONAL STANDARD OF THE
PEOPLE?€?S REPUBLIC OF CHINA
ICS 91.220
P 97
Building construction machinery and equipment - Safety
requirements of drill rigs
ISSUED ON: JUNE 16, 2011
IMPLEMENTED ON: MAY 01, 2012
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People?€?s Republic of China.
Table of Contents
Foreword ... 4
1 Scope ... 5
2 Normative references ... 6
3 Terms and definitions ... 8
4 List of hazards ... 12
5 Safety requirements and measures ... 13
5.1 General safety requirements ... 13
5.2 Driving, tramming and operating positions ... 14
5.3 Control system functions ... 16
5.4 Control device ... 18
5.5 Stability ... 19
5.6 Chassis braking ... 27
5.7 Protection of moving parts ... 29
5.8 Electrical system ... 32
5.9 Hydraulic system ... 32
5.10 Pneumatic system ... 33
5.11 Lighting ... 33
5.12 Fire prevention ... 33
5.13 Noise and vibration ... 34
5.14 Dust and exhaust gas ... 35
5.15 Winches, wire ropes and pulleys ... 36
5.16 Sprocket and chain ... 39
5.17 Columns, masts, feed booms and working platforms ... 39
5.18 Special requirements for remote control and automatic drill rigs ... 42
5.19 Warning devices ... 43
6 Verification of safety requirements/measures ... 44
7 Instructions for use... 44
7.1 Labels ... 44
7.2 Indicator devices ... 44
7.3 Maintenance and repair ... 45
7.4 Instructions for drill rigs use manual ... 45
Appendix A (Normative) Measurement methods for noise and vibration ... 50
Appendix B (Normative) Inspection and testing methods for pulleys, wire ropes and
chains ... 53
Appendix C (Normative) Braking test for drill rigs, excluding drill rigs mounted on
trucks and tractors ... 54
Appendix D (Normative) Relationship between drill rig operating conditions and
hazards ... 57
Appendix E (Informative) Graphical symbols and signs ... 59
Appendix F (Informative) Changes in chapter and figure numbers between this
Standard and EN 791:1995 ... 79
Appendix G (Informative) Technical differences between this Standard and EN
791:1995 and their causes ... 81
Bibliography ... 85
Building construction machinery and equipment - Safety
requirements of drill rigs
1 Scope
This Standard specifies the safety requirements for the design, manufacture, use and
maintenance of drill rigs, mainly involving the important operational safety and
ergonomics of drill rigs.
This Standard applies to drill rigs, including casing, for surface and underground hole
formation in building, tunnels, railways, roads, hydropower stations and water
conservancy projects.
Note: This Standard includes the major hazards of drill rigs under the conditions of
intended use and foreseeable by the manufacturer. However, this Standard does
not include all mechanical, electrical, hydraulic, pneumatic and other device
hazards, nor does it include all hazards involved in general standards. Hazards
not included in this Standard shall be subject to the relevant provisions of GB/T
15706.1 and GB/T 15706.2.
The drill rigs to which this Standard applies mainly has the following
characteristics:
a) There are three types of drilling methods: impact, rotary and rotary impact;
b) Chassis types include fixed, towed and self-propelled;
c) Mainly used to form pile holes, anchor holes, blasting holes and drainage
holes, etc. Specifically including the following models:
??? Drill rigs for pile formation, mainly including impact drill rigs, rotary
drill rigs, long spiral drill rigs, forward/reverse circulation drill rigs,
swing/rotary casing drill rigs, pile top drill rigs, down-the-hole hammer
rock drill rigs, etc.;
??? Drill rigs for anchoring, mainly rotary and rotary impact drill rigs;
??? Drill rigs for blasting holes, mainly including rock drills (cars), down-
the-hole drills, rotary drills, etc.;
??? Drill rigs for other purposes, including rotary spindle drill rigs, rotary
and rotary impact drill rigs for surface/underground drilling,
forward/reverse circulation drill rigs, horizontal directional drill rigs, etc.;
d) Casing or drilling fluid may be used to stabilize the drill hole.
Self-propelled drill rigs includes equipment with a movable chassis such as a
truck, tractor or other wheeled chassis, a tracked chassis, a walking chassis, a
sliding chassis (pulled by a winch), etc. Drill rigs using a truck, tractor, trailer
chassis or other wheeled chassis can travel at a higher speed on the road. Its
design and manufacture shall comply with the standards and regulations for both
drill rigs and road transport vehicles.
If the main machine of the drill rig is an excavator, crane, etc., this type of main
machine shall comply with its own standards when the requirements of this
Standard are not applicable.
If the drill rig is equipped with additional working devices other than the drilling
components specified in this Standard, such as piling devices, these additional
working devices shall also comply with their own safety standards.
Drill rigs used in explosive gas environments shall comply with the provisions
of relevant standards for equipment used in explosive gas environments.
This Standard does not apply to drill rigs used in the petroleum and natural gas industry,
or drill rigs used in open pit and underground mines.
2 Normative references
The terms in the following documents become the terms of this Standard by reference
to this Standard. For dated references, all subsequent amendments (not including errata
content) or revisions do not apply to this standard. However, parties to agreements that
are based on this Standard are encouraged to study whether the latest versions of these
documents can be used. For undated references, the latest edition applies to this
Standard.
GB/T 3766, Hydraulic Fluid Power - General Rules Relating to Systems (GB/T
3766-2001, eqv ISO 4413:1998)
GB/T 3811-2008, Design rules for cranes
GB 4351.1, Portable fire extinguishers - Part 1: Performance and construction (GB
4351.1-2005, ISO 7165:1999, Fire fighting - Portable fire extinguishers -
Performance and construction, NEQ)
GB 5226.1-2008, Electrical Safety of Machinery - Electrical Equipment of
Machines - Part 1: General Requirements (IEC 60204-1:2005, IDT)
GB/T 5972-2009, Cranes - Wire ropes - Care, maintenance, installation,
examination and discard (ISO 4309:2004, IDT)
The materials used in drill rigs shall not be harmful to the safety and health of exposed
person. The material shall be suitable for the intended ambient temperature. The
manufacturer shall indicate the designed operating temperature range of the drill rig in
the operating instruction manual.
5.1.7 Manual operation of drill rig and its components
The lifting points or lifting aids for the complete drill rig or parts shall be clearly
specified. The lifting points or lifting aids can also be used for fixation and protection
during transportation. The lifting points shall be clearly marked.
The articulated chassis shall have a mechanical locking device to lock the hinge point
during lifting and transportation. The locking device shall comply with GB/T 22355.
Drill rig parts that need to be operated by hand shall be designed to be safe for manual
operation.
If the weight and/or shape of a component prevents safe manual operation, it shall be
designed so that a lifting device can be used safely.
5.1.8 Operation and maintenance channel
Ladders, escalators, aisles, steps, handrails, handles and guardrails shall be provided to
ensure that normal operation, adjustment and maintenance positions can be reached
safely, see GB/T 17300. For other requirements, see GB/T 17299.
If doors, windows and skylights are free to open and close, they shall be safe in either
the open or closed state.
5.1.9 Isolation of power source
All external power sources of drill rigs shall be isolated. Isolation devices shall be
clearly marked. If reconnection will endanger exposed person, the isolation device shall
be able to be locked. It shall comply with GB/T 19670 and GB 5226.1-2008 5.3.
After the power source is shut off, any residual or stored energy in the circuit shall be
eliminated without causing harm to exposed person.
However, some circuits may remain connected to their power source, such as to
maintain component position, protect information, and internal lighting.
5.2 Driving, tramming and operating positions
5.2.1 General
Driving, tramming and operating positions shall be reasonably designed and
manufactured so that the operator can complete all necessary actions of driving and
operating the drill rig in these positions without causing danger to himself or other
people near the drill rig. The operator?€?s body size and minimum activity space, as well
as the comfortable operation area and accessible range shall meet the requirements of
GB/T 8420 and GB/T 21935.
For drill rigs mounted on trucks or tractors, the requirements for the driving position
are given in the relevant standards.
If the drill rig is tramming in places where there is a risk of rollover, an alternate driving
position shall be set up or a rollover protection structure (ROPS) that meets the
requirements of GB/T 17922 shall be equipped so that the driver can drive the drill rig
without endangering himself. For some special applications, a remote-control device
shall be equipped.
5.2.2 Operator position
The drill rig shall be provided with an operator?€?s cabin to protect the operator from
noise, dust and adverse weather. However, there are some types of drill rigs or operating
conditions where it is not suitable or possible to equip the operator?€?s cabin.
If used in an environment where there is a risk of falling rocks, the drill rig shall be
equipped with a falling object protection structure (FOPS) that meets the requirements
of acceptance criterion II in GB/T 17771-1999.
In all cases, the drill rigs for pile formation shall be equipped with a protective shed,
which shall meet the requirements of acceptance criteria I in GB/T 17771-1999.
Consideration shall be given to protection against horizontal projections, such as auger
drilling and pile drilling.
The control room shall be equipped with the following devices:
-- When necessary and appropriate, ventilation devices with dust filtering function,
cooling and/or heating devices shall be provided;
Note: No verification is given for this requirement.
-- noise protection device: when measured according to Appendix A, the sound pressure
level in the control room shall not exceed 85 dB(A);
-- floor vibration damping device, see 5.13.3;
-- a quick way to escape from the control room;
-- emergency exits, such as means of breaking windows or panels, providing or placing
window-breaking tools on different sides of the normal exits of the control room;
-- seats: unless that the operator must stand to work, a seat shall be provided; the seat
shall be comfortable and stable and adjustable according to the operator's weight and
5.4 Control device
5.4.1 General
Control devices shall be clearly marked in accordance with relevant standards and shall
be positioned to ensure safe, fast and comfortable operation, see 4.8.7 and Appendix E
of GB/T 15706.2-2007.
The control device shall ensure that its action and effect are consistent.
Except for the control of continuous operations (such as drilling and casing operations),
other control devices shall be of the stop-and-go type [a control device that can trigger
and maintain the operation of dangerous machine functions only when the manual
control device (actuator) is driven]. However, emergency shutdown devices and similar
devices are excluded.
The control device shall also meet the following requirements:
-- The most important control device shall be placed in a comfortable operating area;
-- The second most important control device shall be placed within normal reach;
-- When possible, it shall be placed outside the danger zone.
Note: For the definition of comfort zone and reach range of manipulation, see GB/T
21935.
If the drill rig has multiple operating positions, it shall be equipped with a mode
selection device to enable the operator to select the operating position to be used and
ensure that only one set of operating devices is in effect. However, this provision does
not apply to emergency shutdown and safety devices.
5.4.2 Emergency shutdown and safety devices
5.4.2.1 Emergency shutdown device
The emergency shutdown device shall comply with the requirements of GB 16754 and
shall be placed in a position that is easily accessible to the operator, see 5.3.3.2.
Once the emergency shutdown device is activated, it shall remain in effect until
manually reset. Manual reset shall not restart the machine, but only enable the machine
to restart through the normal start-up procedure.
5.4.2.2 Safety devices for stopping rotation and feeding
Drill rigs with a feed boom may pose a risk of personnel being caught in or injured by
its rotating parts. An automatic stop device shall be installed in close proximity to the
rotating drill assembly where personnel can easily come into contact with it. In an
emergency, the device shall be able to be triggered by the human body or a part of the
human body. Once triggered, it shall automatically operate without any delay or
difficulty to quickly stop the dangerous movement of the equipment. The trigger of the
device shall be clearly marked.
Note 1: For examples of automatic shutdown devices, see 3.26.5 of GB/T 15706.1-
2007.
If the drill rig is equipped with a mechanical drill rod/ drill pipe handling system, only
one automatic shutdown device may be provided at the free end of the drill rod/ drill
pipe. See 5.7.3.3.
When the automatic shutdown device is activated, any residual energy in the system
shall be limited or released so that it cannot cause any dangerous movement.
Once the automatic shutdown device is activated, it shall remai...